RC Pavilions LLC RC Pavilions LLC Request a bid
Joist and joist-girder roof framing set over the sales floor of the Publix at West Bay, Panama City Beach, Florida, photographed at dusk

Bogart, Georgia · Working across the Southeast

Conventional steel and pre-engineered buildings, under one contract.

We fabricate and erect conventional steel buildings, and purchase and install pre-engineered buildings. We work for general contractors in Georgia, Florida and the surrounding Southeast, with more than 30 years of experience in steel fabrication and erection. We also handle misc. steel, stairs, rails and fencing.

Send us a bid set See what we build

Publix — West Bay, Panama City Beach, FL
Joist and joist-girder roof framing, erected in place

Capabilities

Three scopes, on the same package.

Most of our work comes in as a single bid package that crosses trades — a conventional frame with a pre-engineered addition, or a structure that also carries 400 feet of fence and two egress stairs. We take off all of it, so you are not stitching together three subs and three schedules.

01

Structural steel fabrication

Conventional framing detailed, fabricated to the approved drawings and finished to your spec, then delivered and set on your schedule.

  • W-shape beams and columns, A992
  • HSS and pipe columns, A500 Gr. B
  • Shear tabs, moment connections, base plates
  • Steel joists, girders and metal decking
  • Embeds, lintels and bearing plates
  • Shop drawings and submittals
02

Misc. steel & fencing

The scope that usually falls between subs. Stairs, rails and fence lines detailed off the same model as the frame, so nothing gets field-fit twice.

  • Egress and monumental stairs
  • Guardrail, handrail and pipe rail
  • Ornamental and architectural steel
  • Ornamental and chain-link fence, gates
  • Dumpster enclosures and gates
  • Walkway canopies and covered walks
  • Ladders, cages and roof access
  • Bollards, grating and checkered plate
03

Pre-engineered buildings

We do not manufacture PEMB — we buy the building and install it. That means we source the package, handle the manufacturer coordination, and install it under the same contract as our conventional steel.

  • PEMB package purchased and installed
  • Manufacturer selection and coordination
  • Cold-formed building systems
  • Purlins, girts and bracing systems
  • Standing-seam and R-panel roof systems
  • Anchor bolt layout and foundation coordination
  • Hybrid conventional / PEMB structures

How a job runs

From bid set to final connection.

Four stages, in this order, every time. The dates that matter to you — drawing submittal, fabrication release, delivery and erection — are named in the proposal, not left open.

Stage 01

Bid & takeoff

We take off every piece from your bid set — members, connections, stairs, rail and fence — and price it against current mill and stock lengths. Alternates and phasing priced separately.

Stage 02

Detailing & submittals

Shop and erection drawings are produced from a full 3D model and submitted for the EOR's review as a defined lump sum, so the submittal milestone is a date on the schedule rather than a variable.

Stage 03

Fabrication

Conventional steel is fabricated to AWS D1.1, primed and staged in erection sequence, so it reaches the site in the order your crew needs it rather than the order it was cut. Pre-engineered packages are released to the manufacturer and tracked to the same delivery date.

Stage 04

Delivery & erection

Delivered and erected under our contract. One company answers for the weld, the fit and the field — which is the whole reason to buy fabrication and erection together instead of splitting them between two subs.

Preconstruction

Detailing, engineering and estimating come with the package.

You are not buying steel and then going to find someone to model it, seal the connections and price the change orders. All of it arrives under the same contract, off the same set of numbers.

Detailing

Drawing submittals & 3D modeling

Complete submittal packages produced from a full 3D model of the structure. Clashes and misfits get caught on screen instead of showing up on your site as a piece that will not go in.

  • Shop and erection drawings
  • Full 3D structural model
  • Connection detailing
  • Anchor bolt and embed plans
  • Bills of material straight from the model
  • Model files for BIM coordination
Machine files

Files for automated fabrication

We furnish the file formats that drive automated fabrication equipment directly — beam lines, drill lines, plasma and coping machines — so pieces get cut from the same data you approved rather than re-keyed off a printed drawing.

  • NC / DSTV files for beam and drill lines
  • Plate and plasma cut files
  • IFC and model exchange formats
  • CNC-ready output straight from the model
  • Piece marks carried from model to field
  • Revisions reissued as updated machine files
Engineering

Engineering & estimating

We take off the bid set, price it, and carry the connection design through to sealed drawings — including the alternates, the phasing and the change order pricing nobody wants to chase later.

  • Takeoff and budget pricing
  • Delegated connection design
  • PE-sealed drawings and calculations
  • Value engineering and alternates
  • Phase-by-phase pricing
  • Change order pricing

Standards

What we furnish, unless your spec says otherwise.

These are our defaults. Where a project's painting section, certification requirement or material spec differs, we price to the spec and call out the delta in the proposal rather than absorbing it quietly.

Welding
AWS D1.1 certified weldersQualified procedures to the structural welding code. Welder qualification records available on request.
Shop primer
Sherwin-Williams Kem Kromik B50AZ116Universal alkyd metal primer, gray, 2.0–4.0 mils DFT. Specialty and high-performance coatings priced as specified.
Wide flange
ASTM A992 Gr. 50
Plate, angle & channel
ASTM A36
HSS & pipe
ASTM A500 Gr. B / A53 Gr. B
Stock lengths
20′ · 35′ · 40′Members are nested into stock before pricing, so drop is accounted for in the number you get.
Fabrication
AISC Certified shopsConventional steel is fabricated in AISC Certified shops, so projects that require certified shop fabrication are covered without a substitution request.
Erection
Carried in our scopeWe hold erection in the package and manage the crew, so the frame stays one contract and one point of contact from bid through final connection.

Selected projects

Six projects. Two of them still in the field.

Retail, restaurants, healthcare, public parks, emergency services and equipment sales — conventional frames, pre-engineered systems, and the jobs where the two get built into each other. Every package below was taken off, detailed, fabricated and erected by us.

In progress

West Bay · Panama City Beach, Florida

Publix — West Bay

Full structural steel package for a new-build Publix store: interior columns, joist girders and open-web steel joists carrying the roof deck across the sales floor, plus the canopy and vestibule framing at the storefront. Set in erection sequence so the deck crew could follow us straight across the building without a gap.

Structural steelJoists & deckErectionRetail
Aerial view of the Publix at West Bay under construction, with joist girders and open-web joists spanning the building Overhead view of the completed roof framing at Publix West Bay, showing joist girders, bridging and metal roof deck
In progress

Snellville, Georgia

Briscoe Park

Conventional structural steel paired with a pre-engineered building system we purchased and installed, for new park structures: long-span framing over the building footprint and an open steel canopy carried above the seating terrace. Much of the frame stays exposed in the finished building, so fabrication tolerances and finish had to hold up to being looked at from the field rather than hidden above a ceiling.

Conventional steelPEMBCanopyPublic / parks
Aerial view of the steel frame at Briscoe Park in Snellville, Georgia, with crews working from lifts inside the structure Steel canopy framing over the seating terrace at Briscoe Park
Complete

Covington, Georgia

Taco Bell — Covington

A pavilion over the outdoor dining patio — the scope this company is named for. HSS columns carrying an open trellis roof frame, wrapped by picket guardrail around the patio slab. Fabricated, delivered and set on a live restaurant site, then finished out in black to match the storefront.

PavilionHSS columnsGuardrailRestaurant
Completed steel patio pavilion and guardrail at the Taco Bell in Covington, Georgia The same pavilion during construction, with the trellis roof frame set and the guardrail still in shop primer
Complete

Loganville, Georgia

Encompass Health Piedmont

Rehabilitation hospital — the whole miscellaneous metals package on one contract. Ornamental fence and screen walls around the courtyard and utility yards, mesh-infill man gates on card readers, long steel canopies over the connecting walkways, covered framing at the outdoor kitchen, and handrail and guardrail at the courtyard steps and ramp. Plus the dumpster enclosure gates on the service side.

Ornamental fenceGatesWalkway canopiesRailsHealthcare
Steel walkway canopy and ornamental fence run at Encompass Health Piedmont, with a crew member setting the gate canopy Ornamental steel fence enclosing the gas meter yard beneath the walkway canopy at Encompass Health Piedmont Fabricated dumpster enclosure gates set at the masonry enclosure on the service side of the hospital
Complete

Athens, Georgia

Equipment Share

Pre-engineered metal building for an equipment dealership and service facility, purchased and installed by us: primary frames, purlins and girts, wall and roof panel, roll-up service doors, and a free-standing steel canopy over the outside work slab. From anchor bolt layout through the last piece of trim.

PEMBCanopyRoll-up doorsErection
Completed Equipment Share pre-engineered metal building in Athens, Georgia, with a free-standing steel canopy over the concrete work slab Storefront entry elevation of the completed Equipment Share building, with service bay doors running down the side
Complete

Douglasville · Douglas County, Georgia

Douglas County E-911

Conventional structural steel for the county's emergency communications center: wide-flange columns and beams with vertical braced frames, cantilevered roof framing at the perimeter, and metal roof deck over the operations floor. Erected alongside the masonry walls on a tight, active site.

Conventional steelBraced framesRoof deckPublic safety
Braced structural steel frame erected at the Douglas County E-911 center, with crews working on the roof framing Metal roof deck being laid over the structural steel frame at the Douglas County E-911 center

Budget estimator

Need a number before you have drawings?

Put in your width, length and eave height and get a budget range on a pole barn, a cold-formed building or a pre-engineered red-iron building — with a sketch of your building drawn from what you typed. Supplied, or supplied and erected.

Open the estimator Planning money — not a quote

Request a bid

Send us the set. We'll price it.

Tell us what the package covers and when you need the number. If your drawings are too large to attach, send a link to the plan room or FTP and we'll pull them down.

Office1040 Commerce Ct., Unit 1
Bogart, GA 30622

Scope needed
Opens an email to estimating with everything filled in.